Advertisement
and power on the camcorder. Then, press the STOP button over 5
seconds.
CAUTION:
A. Do not connect or disconnect any cables while the camcorder
is powered on.
B. Before using the TP Board Kit, be sure to clean S301 pattern
with alcohol and confirm that there is no dust in the TP Clip.
C. To achieve the best adjustment results, warm up the
camcorder for approx. 30 minutes before adjustment.
D. When removing the TP Clip from S301 on the camcorder, be
sure to pinch the grips.
6. Set up the camcorder for adjustment as follows:
Fig. E2-1
93
Advertisement
