Advertisement
Digital Still Camera
CompactFlash Card Insertion/ Removal
The captured images will be stored on this
CompactFlash Card.
Be sure to insert the CompactFlash Card
before using the Built-in Digital Still
Camera.
1
4
2
3
,
Concerning the
CompactFlash Card
Digital Still Camera (continued)
PHOTO
VCR
CAMERA
OFF
Note:
If CompactFlash Card is not inserted, NO CF CARD appears on-screen.
Set POWER to OFF, then insert the CompactFlash Card.
Sound will not be recorded.
The features below are not available while in PHOTO mode.
Auto Fade
Digital Fade
Digital Zoom
Digital E.I.S.
Security Mode
Intelligent Titler
Picture in Picture Wipe Title
WARNING:
Do not, under any circumstances,
remove the card immediately after
pressing the RECORD/PAUSE (during
recording of an image) or while deleting.
This could damage the format of the
card and make it unusable.
Before you begin...
1
Slide TAPE EJECT to open door.
2
Insert the CompactFlash Card into
the CompactFlash Card Slot in the
direction of the arrow. The side of the
card with the arrow faces the back
(battery side) of the camcorder (see
the picture at the left).
3
Push the card fully into the Slot.
4
Slide CARD EJECT, to release the
card.
Note:
CAUTION:
5
Press RECORD/PAUSE to capture
image.
As the image is processed, the
status screens below appear.
The next image may be captured
5
after COMPLETED disappears.
Depending on the image taken, the
image page remaining indication
may not change, or it may be
decreased by 2 images.
059 FINE
059 FINE
060 FINE
060 FINE
PHOTO
PHOTO
PROCESSING
For sharper images, set electronic
shutter to higher speed when
shooting in bright conditions, such
as outdoors.
Color Digital Filter
Still/Strobe/Wide
Digital Wipe Mode
Recording
1
REC
PLAY
PHOTO
DISPLAY
Using the Light
For capture of still images in dim lighting.
LIGHT
ON
OFF AUTO
PHOTO
PHOTO
COMPLETED
060 FINE
Before you begin...
1
Press LCD-OPEN and swing LCD
monitor fully open. Adjust viewing
angle.
2
Set POWER to PHOTO.
3
UP
Slide PHOTO MODE to REC.
3
4
DOWN
,
MENU
4
Press MENU for REC Mode.
Press UP
NORMAL or FINE . Then,
2
press DISPLAY to set.
POWER
REC
PHOTO
VCR
CAMERA
OFF
Note:
Please note that the included 8 MB
CompactFlash Card already
contains 12 pre-recorded titles for
your use.
Before you begin...
Connect Camcorder to power source.
Insert the CompactFlash Card.
Set POWER to PHOTO.
Set LIGHT to AUTO.
When RECORD/PAUSE is pressed to
capture an image in dim lighting, the Light
RECORD/
comes on for about 2 seconds, the image
PAUSE
is captured, then goes out.
Or, set LIGHT to ON/OFF manually.
PHOTO
VCR
CAMERA
OFF
PHOTO
appears in EVF or LCD Monitor when
Light is on.
Caution:
Light becomes hot. Never cover Light
while on.
Note:
Using Light reduces battery operating
time.
Provide proper ventilation when using
Light extensively in a hot environment.
Using Light when the Camcorder is
powered by a car battery may shorten
bulb life.
Set Light to OFF when not in use.
060 FINE
PHOTO
REC MODE : PUSH MENU KEY
REC MODE : PUSH MENU KEY
or DOWN
to select
- - - REC MODE - - -
- - - REC MODE - - -
NORMAL
FINE
FINE
SELECT : PUSH
SELECT : PUSH
/
KEY
SET
SET
: PUSH DISPLAY KEY
: PUSH DISPLAY KEY
Advertisement
