Panasonic PalmSight PV-L750 Service Manual page 20

6. Open the Cassette Cover fully.
7. Remove the tape slack by rotating the Takeup Reel Gear of the
cassette tape as shown in Fig. 4-4.
8. Take out the cassette tape.
9. Connect the Power or Battery to set the Mechanism to STOP
Position.
5.1.8. HOW TO USE TP BOARD KIT
5.1.8.1. TP Board Kit is required when:
1. performing "Tape Interchangeability Adjustment."
2. performing "PC-EVR Adjustment."
3. the cassette tape is jammed. Refer to
JAMMED TAPE."
4. loading or unloading the Mechanism (Electrical Method).
5.1.8.2. How to assemble TP Board Kit:
1. Assemble the TP Board Kit as shown.
Fig. 4-4
"HOW TO REMOVE A
Fig. 5-1
20