Operation, cont'd
I/O controls
Primary functions
Secondary functions
Front panel
configuration
g
3-8
MTPX Plus Twisted Pair Matrix Switchers • Operation
Action/
indication:
Green when selected
Action 1:
locks
Action 2:
Select Lock mode 1 and/or toggle between
Resets
Action:
Port
Action/
indication:
Audio
Action/
indication:
Video button — The Video button has two primary functions (•) and four
secondary functions (❏):
•
Selects and deselects video for a configuration that is being created or
viewed.
•
Lights green to indicate that video is available for configuring or for
viewing.
With the Enter button and Audio button, selects between front panel
❏
locks (Lock mode 2 and Lock mode 0). See "Setting the front panel locks
(Executive modes)" on page 3-46.
With the Audio button, selects between front panel locks (Lock mode 2
❏
and Lock mode 1). See "Setting the front panel locks (Executive modes)"
on page 3-46.
With the Audio button, commands the front panel system reset.
❏
See "Performing a system reset from the front panel" on page 3-48.
Selects the RS-232 protocol for the rear panel RS-232/RS-422 port in
❏
Serial Port and Audio/RS-232 Input Configuration mode and indicates the
selection. See "Selecting the rear panel Remote port protocol and baud
rate" on page 3-50.
Select video.
Select audio.
Red when selected
VIDEO
AUDIO
With Enter, select Lock mode 2 and/or
toggle between mode 0 and mode 2.
mode 2 and mode 1.
Perform a system reset
Select RS-232.
Select RS-422.
Blink: selected
Blink: selected
Select Audio mode.
Blinks red.