Table of Contents
Advertisement
Operation, cont'd
Front Panel Operations
The following sections detail the power-up process and then provide sample
procedures for the following actions:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Definitions
The following terms, which apply to all Extron matrix switchers, are used
throughout this manual:
Tie — An input-to-output connection
Set of ties — An input tied to two or more outputs. (An output can never be tied
Configuration — One or more ties or one or more sets of ties
Current configuration — The configuration that is currently active in the
Global memory preset — A configuration that has been stored. Up to 32 global
Room — A subset of outputs that are logically related to each other, as
Room memory preset — A configuration consisting of outputs in a single room
3-10
MTPX Plus Twisted Pair Matrix Switchers • Operation
Creating ties, sets of ties, and configurations
Changing a configuration
Viewing ties, sets of ties, and configurations
Creating I/O groups
Saving a preset
Recalling a preset
Muting and unmuting outputs
Viewing and adjusting the TP input audio level
Viewing and adjusting the local output volume
Locking and unlocking the front panel
Performing front panel resets
Toggling background illumination on an off
Defining the audio/RS-232 wire pair
Reading and setting the RS-232/RS-422 Remote port settings
to more than one input.)
switcher (also called configuration 0)
memory presets can be stored in memory. Preset locations are assigned
to the input buttons and output buttons. When a preset is retrieved from
memory, it becomes the current configuration.
All 32 global presets can be selected from the front panel for either saving or
retrieving.
determined by the operator. The switchers support up to 10 rooms, each of
which can consist of from 1 to 16 outputs.
that has been stored. When a room preset is retrieved from memory, it
becomes the current configuration.
Advertisement
Table of Contents
