Extron electronics MTPX Plus Series User Manual page 111

Command/response table for SIS commands (continued)
Command
Save, recall, and directly write presets (continued)
Direct write process —
N The direct write of a global preset should always be preceded by a clear global preset ties command of that same
preset number, as shown below. In a directly-written preset, each output position's tied input (or no tied input) remains
unchanged unless overwritten or cleared.
If you do not clear the ties in a global preset number before you directly write a global preset to that number, ties that
are part of the previous version of the specified preset with the same number can unexpectedly become part of the newly-
created preset.
Clear a global preset's ties
Directly write a global preset
Example:
Write room outputs
• A room can contain a maximum of 16 outputs (
N
• An output can belong to only one room.
• The maximum number of rooms (
• If no room name is assigned, the default name is "Room #
Example:
Read room outputs
Recall room preset
Directly write a room preset
Example:
X2)
N = Global or room preset #
X!
= Input number
X@
= Output number
X2@
= Room # (for room presets)
ASCII command
(host to switcher)
E X2) }
+ P0*!
E X2) X! X@ X! X@ X!
+ P * ! * %
E }
+27P0*!
+27P12*5!10*09%3*2$3*8&
Esc
X2@ X@ X@ X@ ]
Mpr , , , ...
1 2 n
X@
s).
X2@
s) is 10.
E }
, , , ,
8 3 04 5 6MR
EX2@ }
MR
E }
3MR
X2@ X2) .
*
E X2@ X2) X! X@ X! X@
+ * P * ! *
+7*3P12*7&11*5$4*5%6*6!
Esc
0 - 32, 10 maximum for a room preset (0 = current configuration)
00 – (maximum number of inputs for your model)
00 – (maximum number of inputs for your model)
10 max. (each can have up to 10 presets (
MTPX Plus Twisted Pair Matrix Switchers • Programmer's Guide
Response
(switcher to host)
X2)]
Spr
X@ X! X@ }
* $ ... * &
X2)]
Spr
]
Spr27
]
Spr27
X2@ X@ X@ X@ ]
Mpr , , , ...
1 2 n
X2@ X# X! X@
• 1 ,• 2 ,• "
n
]
, , , ,
Mpr8 03 04 05 06
X2) X@ X@ X@ ]
, , , ...
1 2 n
]
Class 1,01,02,08,09
X2@• X2)]
Rmm Rpr
X! X@ X! X@ }
% * $ ... * &
X2@• X2)]
Rmm Spr
• ]
Rmm07 Spr03
X2)
s) assigned)
Additional
description
X2)
Clear all ties in preset .
The tie all (!), tie RGB (&),
tie video (%), and tie audio ($)
commands are all valid.
Clear all ties in preset 27.
Brackets are shown to separate
ties for clarity only. Create
global preset 27, which ties
video and audio input 12 to
output 5, video input 10 to
output 9, audio input 3 to
output 2, and video input 3
to output 8.
See notes.
Outputs 3, 4, 5, and 6 are
assigned to room 8.
Outputs 1, 2, 8, and 9 are
assigned to room 3, which
named "Class 1".
Command character is a
period.
Enter as many ties as are
valid for this model. Tie all (!),
tie RGB (&), tie video (%),
and tie audio ($) commands
are all valid.
Brackets are shown to
separate ties for clarity only.
Create preset 3 for room 7,
which ties audio input 12
to output 7, video input 11
to output 5, RGB input 4
to output 5, and video and
audio input 6 to output 6.
4-17