Changing The Input Gain And Attenuation - Extron electronics MTPX Plus Series User Manual

HTML Operation, cont'd

Changing the input gain and attenuation

Users can set each input's level of audio gain or attenuation (-18 dB to +24 dB)
from the I/O Settings page. Audio levels can be adjusted so there are no noticeable
volume differences between sources.
Change an input's gain and attenuation setting as follows:
1.
Figure 6-15 — Input Audio Level drop box
2.
N As an alternative to steps 1 and 2, or to listen to the audio as you make
6-18 MTPX Plus Twisted Pair Matrix Switchers • HTML Operation
Click the desired input's Input Audio Level drop box. A drop-down scroll
box appears (figure 6-15).
Click and drag the slider or click on the scroll up
button until the desired value is visible.
adjustments, click on the up
button or the scroll down
button or down button.