Table of Contents
Advertisement
Matrix Software, cont'd
Updating firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher's control board without taking the switcher out of service.
Update the switcher firmware as follows:
1.
NOTE
This sequence is shown for
example only.
For the MTPX Plus,
the firmware file selected and
shown is "MTPX Plus".
Figure 5-9 — Location of firmware upgrade files
2.
3.
4.
5.
N Note the folder to which the firmware file is saved.
6.
5-12
MTPX Plus Twisted Pair Matrix Switchers • Matrix Software
Visit the Extron Web site, www.extron.com, click the Download Center tab,
and then click the Firmware link (figure 5-9).
1
Select the appropriate firmware file (MTPX 1616 Series) to download and click
Download.
Enter the requested personal information and then click Download to copy the
firmware to your computer.
Click Run twice (figure 5-10 on the next page). The PC downloads the
firmware update from the Extron Web site and starts the Extron Installation
Program to extract the firmware file.
Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
Click Finish to exit the program.
3
3
1
2
Advertisement
Table of Contents
