Table of Contents
Advertisement
Example 3: Removing a tie from a set of video and audio ties
In the following example, an existing audio tie is removed from the current
configuration. The steps show the front panel indications that result from your
action.
N This example assumes that you have performed example 1 and example 2.
1.
Press and release the Esc button (figure 3-16).
Press the Esc button to clear all selections.
C O N T R O L
VIEW
ENTER
PRESET
The button flashes once.
Figure 3-16 — Clear all selections
2.
To select audio only for the tie, if necessary, press and release the Video button
and the Audio button (figure 3-17).
Press the Video button to toggle on and off.
The button is unlit or background illuminated
Figure 3-17 — Select audio only
3.
Press and release the input 5 button (figure 3-18).
Press and release the Input 5 button.
The button lights red.
1
2
3
17 18 19 20 21 22 23 24 32
The Output 3, Output 4, and Output 8 buttons light
red to indicate the audio ties created in example 1.
1
2
3
17 18 19 20 21 22 23 24 32
The Output 1 button does not light to indicate the tie
created in example 2 because that tie is video only.
Figure 3-18 — Select an input
MTPX Plus Twisted Pair Matrix Switchers • Operation
ESC
I / O
VIDEO
AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
when deselected.
4
5
6
7
8 16
4
5
6
7
8 16
I
N
P
U
T
S
O
U
T
P
U
T
S
3-17
Advertisement
Table of Contents
