Table of Contents
Advertisement
Control buttons
Primary functions
Action:
Indication:
Secondary functions
I/O Grouping
Action/
indication:
Port and input
Action 1:
configuration
Action 2/
indication:
Front panel
Action:
locks
Audio
Action:
c
Save changes
Select Preset mode
Blink: save needed
Blink: Save preset
Lit: Recall preset
ENTER
PRESET
Select group 1.
Select group 2.
Select 9600 baud.
Select 19200 baud.
Blink: selected
Blink: selected
With Video and
Audio, select Lock
mode 2 and/or
toggle between
mode 0 and mode 2.
Enter button — The Enter button has two primary functions (•) and four
secondary functions (❏):
•
Saves configuration or preset changes that you make on the front panel.
To create a simple configuration:
Specify video, audio, or both (see I/O selection buttons [
[
]).
h
Press the desired input button (
Press the desired output button(s) (
Press the Enter button.
•
Indicates that a potential tie has been created but not saved.
In the I/O Group mode, selects group 1 and indicate the selection. See
❏
"I/O grouping" on page 3-23.
With the Preset, View, and Esc buttons, selects Serial Port and Audio/
❏
RS-232 Input Configuration mode. See "Selecting the rear panel Remote
port protocol and baud rate" on page 3-50 and "Defining the audio/
RS-232 wire pair" on page 3-49.
Selects 9600 baud for the rear panel RS-232/RS-422 port in Serial Port
❏
and Audio/RS-232 Input Configuration mode and indicates the selection.
See "Selecting the rear panel Remote port protocol and baud rate" on
page 3-50.
With the Video and Audio buttons, selects front panel security
❏
Lock mode 2 or toggles between mode 0 (unlocked) and mode 2. See
"Setting the front panel locks (Executive modes)" on page 3-46.
MTPX Plus Twisted Pair Matrix Switchers • Operation
Select View mode
View mode selected
VIEW
Select group 3.
Select Configuration mode
Select 38400 baud.
Blink: selected
In Audio mode,
decrease input level
or output volume.
).
a
b
).
Cancel/escape
Flashes once
ESC
Select group 4.
Select 115200 baud.
Blink: selected
In Audio mode,
increase input level
or output volume.
] and
g
3-5
Advertisement
Table of Contents
