Control.buttons - Extron electronics FOX 4G Matrix 3200 User Manual

Control buttons
Primary functions
Action
Indication
Secondary functions
I/O Grouping Action
Indication
Port Action 1
configuration
Action 2
Indication
Front panel Action
lock
Indication
c
Save changes Select Preset mode
Blink: save needed Blink: Save preset
Lit: Recall preset
ENTER PRESET
Select group 1. Select group 2.
Lit: group selected. Lit: group selected.
Select 9600 baud. Select 19200 baud.
Blink: selected Blink: selected
With Esc, toggle
front panel lock
on and off.
Flash twice to indicated the front panel has
Enter button — The Enter button has three primary functions (•) and four
secondary functions (❏):
• Save changes that you make on the front panel. To create a simple
configuration:
Press the desired input button (

Press the desired output button(s) (

Press the Enter button (

• Indicate that a potential tie has been created but not saved.
• Indicate that a global preset has been selected to be saved or recalled but
that the preset action has not been accomplished.
In the I/O Group mode, select group 1 and indicate its selection.
❏
See "I/O grouping" on page 3-18.
With the Preset, View, and Esc buttons, select Serial Port Selection and
❏
Configuration mode. See "Selecting the rear panel Remote port protocol
and baud rate" on page 3-28.
Select 9600 baud for the RS-232/RS-422 port in Serial Port Selection and
❏
Configuration mode and indicate its selection. See "Selecting the rear
panel Remote port protocol and baud rate" on page 3-28.
With the Esc button, toggles the front panel lock on and off. See "Locking
❏
the front panel (Executive mode)" on page 3-26.
Select View mode
View mode selected
VIEW
Select group 3.
Lit: group selected.
Select Configuration mode
Select 38400 baud.
Blink: selected
been locked or unlocked.
).
a
b
).
).
c
FOX 4G Matrix Switchers • Operation
Cancel/escape
Flashes once
ESC
Select group 4.
Lit: group selected.
Select 115200 baud.
Blink: selected
With Enter, toggle
front panel lock
on and off.
3-5