Ricoh Di-C1.5a Manual page 83

After Moving the Machine a Long Distance
Do the "Auto Color Registration" as follows. This
optimizes color registration.
First, do "Forced Line Position Adj. Mode c" (SP2-
111-3).
Then, do "Forced Line Position Adj. Mode a"
(SP2-111-1).
To check if SP 2-111-1 was successful, watch the
screen during the process. A message is
displayed at the end.
Also, you can check the result with SP 2-194-007
(0: Completed successfully, 1: Failed).
Make sure that the side fences in the trays are
correctly positioned.
Slide 83
SP 2111-1 and –3 are used at other occasions, after replacing certain parts. We
will see this again.
For SP 2194: see these sections of the field service manual.
FSM Appendices
FSM Appendices
Process Control Error Conditions
Troubleshooting Guide
83
Di-C1.5 Training