Slide 26
If the safe shutdown takes more than 2 minutes, unplug the power cord.
Mode
Stand-by
Operation
Error
Starting up
Safe Shutdown
In this machine, SDVDB (shut down and voltage
detection board) protects the HDD unit.
After the main power switch of the machine has
been turned off, the SDVDB keeps the power
supply to the controller until the HDD unit has
been shutdown safely.
If the safe shutdown takes more than 2 minutes
when shutting down from normal stand-by mode,
there is a problem with the controller board. It
may be necessary to replace this board.
Status
Stand-by
Scanning
Copying/Printing
HDD deleting
Firmware updating
HDD encrypting
SC issued
Application error
Starting up
Details
Stand-by
Panel off
Low power
Operation SW off
-
-
SC level A, D
SC level B, C
Application SD
Removed
During 1 min. after
application screen is
displayed
26
Di-C1.5 Training
Time to Shut Down
Less than 10 s
0 s
Less than 20 s
Less than 360 s
Less than 360 s
Less than 10 s
Less than 360 s
Less than 80 s