Ricoh Di-C1.5a Manual page 356

Do the ACC procedure.
User Tools > Maintenance > ACC > Copier >
Start
User Tools > Maintenance > ACC > Printer >
Start > Test Patterns 1, 2, and 3
Do the forced line position adjustment
First do SP2-111-3 (Mode c).
Then do SP2-111-1 (Mode a).
To check if SP 2-111-1 was successful, watch the
screen during the process. A message is
displayed at the end.
» Also, you can check the result with SP 2-194-007 (0:
Completed successfully, 1: Failed).
Slide 356
Ask the class to study the 'Preparation before operation check' procedure in the
manual.
After PM
356
Di-C1.5 Training