Table of Contents
Advertisement
After you install this unit, it must be enabled with
an SP mode (see the installation procedure for
details).
Test the operation of this device after
installation.
Try to scan a document and store it to the SD
card or USB memory device.
Slide 70
Procedure for storing a file on an SD card/USB device
1.Insert an SD card or USB memory device in the slot.
You can connect only one removable memory device at a time.
2.Close the media slot cover.
If you leave the cover open, static electricity conducted through an inserted
SD card could cause the machine to malfunction.
3.Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
4.Place originals.
5.Press [Store File].
6.Press [Store to Memory Device].
7.Press [OK].
8.Press the [Start] key.
When writing is complete, a confirmation message appears.
9.Press [Exit].
10.Remove the memory device from the media slot.
Do not remove the memory device while writing is in process.
USB/SD Slot
70
Di-C1.5 Training
Advertisement
Table of Contents
