Ricoh Di-C1.5a Manual page 397

2.2 Energy Saver Mode: Sleep Mode – 1
Sleep mode is used instead of auto off mode
when a printer/scanner or fax unit is installed.
The machine enters sleep mode when one of the
following is done.
When the machine enters sleep mode, no power
is supplied to the printing engine, and almost
none to the controller.
Recovery time
Slide 397
No additional notes
2. Energy Saving
The auto off timer runs out after the last job.
The operation switch is pressed to turn the power
off.
Less than 10 seconds
397
Di-C1.5 Training