Ricoh Di-C1.5a Manual page 327

Shifting and Stapling (2)
Belt Roller
Position Sensor
Slide 327
The belt roller position sensor detects the position of the belt roller unit.
When the belt roller solenoid releases the idle gear, the gear to the right turns.
This has a cam and shaft attached to it, and this lifts the belt roller unit.
Belt Roller
Unit
Idle Gear
Belt Roller
Solenoid
327
Top diagram: The pick-
up roller unit moves
down to send the next
sheet to the jogger tray.
Bottom diagram: When
the stack is complete,
the belt roller solenoid
releases the idle gear,
and the belt roller unit
lifts.
Then the pick-up roller
changes direction
again and feeds the
stack out.
Di-C1.5 Training