Ricoh Di-C1.5a Manual page 319

Feed-out to the Side Tray
Inverter
Junction Gate
The paper pushes the inverter junction gate open.
The gate is normally closed by spring tension.
After the trailing edge of the paper passes the inverter junction
gate, the gate closes.
Then, the inverter roller rotates in reverse. At the same time, the
side tray gate solenoid turns on and the side tray junction gate
opens. The paper goes to the side tray, instead of the duplex unit.
Slide 319
The solenoid is at the rear of the tray, near the motor.
When the side tray exit sensor detects the trailing edge of the paper, the side
tray gate solenoid turns off and closes the path to the side tray. This sensor also
detects paper jams.
Side Tray
Junction Gate
319
Di-C1.5 Training
Side Tray
Exit Sensor
Side Tray
Gate Solenoid