Ricoh Di-C1.5a Manual page 6

Process Control
Toner Supply
Transfer
Paper Feed
Fusing
Paper Exit
Duplex
Slide 6
PROCESS CONTROL
This section explains the basic points about how the machine controls the copy
process to compensate for changes in operating conditions.
Toner supply control, and toner near-end/end detection are covered in this
section.
TONER SUPPLY
The toner supply mechanism will be described.
Toner supply control, and near-end/end detection are covered in the process
control section.
TRANSFER
Image transfer, paper transfer, and paper separation will be described.
PAPER FEED
The paper feed mechanism for the main body will be described. The optional tray
units will be dealt with in later sections.
FUSING
Fusing will be described.
PAPER EXIT
The paper feed out mechanisms will be described.
DUPLEX
The duplex mechanisms will be described.
The duplex unit is a standard component of this model.
Course Overview - 2
6
Di-C1.5 Training