Ricoh Di-C1.5a Manual page 175

Toner Density Adjustment Mode
After power-on (toner supply mode only, no
consumption)
Before ACC
In this way, the customer can execute the toner
density adjustment mode, if they think that color
balance is not good. It becomes part of the ACC
process.
At end of job (toner supply mode only, no
consumption)
The machine has a forced toner density
adjustment mode (SP 3011 002).
Slide 175
SP 3043 can be adjusted to control when toner density adjustment mode is
done, or disable the feature at each of the times listed on the slide.
In addition to the times stated on the slide, it is possible to do toner density
adjustment in standby mode (3043 003).
When is it Done?
175
Di-C1.5 Training