Table of Contents
Advertisement
Simrad EK15
Supported telegram formats for heading:
→ HDG Heading, deviation and variation on page 253
→ HDT Heading, true on page 254
→ HDM Heading, magnetic on page 254
→ VHW Water speed and heading on page 255
Supported telegram formats for distance:
→ RMC Recommended minimum specific GNSS data on page 254
→ VHW Water speed and heading on page 255
→ VLW Dual ground/water distance on page 256
→ VTG Course over ground & ground speed on page 256
Supported telegram formats for positioning:
→ GLL Geographical position latitude/longitude on page 252
→ GGA Global positioning system fix data on page 252
→ RMC Recommended minimum specific GNSS data on page 254
Supported telegram formats for speed:
→ RMC Recommended minimum specific GNSS data on page 254
→ VHW Water speed and heading on page 255
→ VTG Course over ground & ground speed on page 256
Related topics
• Setup menu on page 138
• Navigation dialog box on page 176
Physical cabling
The first step (with sub-steps) in this procedure explains how to do the physical cabling
using the relevant connection. The remaining steps describe how to set up the interface
parameters in the EK15 software.
Procedure
Connect the EK15 to the GPS system using a serial line or an Ethernet line.
1
Serial line
a
Locate a free serial port that can be used for this communication.
90
351718/C
Advertisement
Table of Contents
