Table of Contents
Advertisement
Simrad EK15
4
Switch off the colour display.
If required, refer to the instructions provided by the display manufacturer.
5
Switch off the transceiver(s).
The Single Beam Transceiver (SBT) is not provided with an on/off switch.
Unless a dedicated solution has been provided during the installation to facilitate
power on/off, you can leave the transceiver(s) on. However, if you know that the
EK15 is not to be used for a longer period of time, disconnect the power to the
transceiver(s).
46
351718/C
Advertisement
Table of Contents
