Simrad EK15 Reference Manual page 142

Simrad EK15
3
Beam Direction
The purpose of the
up-side down. This is typically used if the EK15 transducers are located at the
bottom of a fish cage looking upwards.
→ Beam Direction function on page 216
4
Bottom Detector
The purpose of the
depth limits most likely to be used during the EK15 operation. In this dialog box,
you can also modify the setting for
relative to the bottom echo.
→ Bottom Detector dialog box on page 218
5
Calibration
The purpose of the
measured target results from the system calibration.
→ Calibration dialog box on page 220
140
function is to turn the echogram presentation
Beam Direction
dialog box is to define the upper and lower
Bottom Detector
Bottom Backstep
dialog box is to accept the reference target and
Calibration
to change the bottom detection
351718/C