Simrad EK15 Reference Manual page 240

Simrad EK15
File Output; Raw Data
Use this tab to save raw data files, to control
their sizes, and to specify automatic start of the
recording. Raw data files can be recorded by the
EK15 and stored to file. These raw data files can
later be replayed by the EK15 for further analysis.
Each raw data file name has the following format:
PREFIX
DYYYYMMDD
THHMMSS
Parameters
1
General
a
Save Raw Data
Check this box to save raw data to file.
b
File Name Prefix
Type any name into the text box. The chosen name will be used as prefix in
all the raw data file names.
c
Range
Use this spin box to define which range to collect echo sounder data from.
2
File Size
a
Max(imum) Vessel Distance
Use this spin box to define a limit (in nautical miles) for the maximum distance
to be contained in one file. A value of 0 means no limit.
b
Max(imum) File Size
Use this spin box to define a limit for the maximum amount of bytes to be
contained in one raw data file. A value of 0 means no limit.
c
Current File Size
When recording raw data is in progress the current file size is displayed.
3
Automatic Start
Raw data output can be set to start automatically after a predefined sailing distance.
a
Start at vessel distance
Select required sailing distance (in nautical miles) before raw data output is
initiated.
Topics
• File Output; Directory on page 237
• File Output; Raw Data on page 238
• File Output; Processed Data on page 239
Related procedures
• Saving echogram sequences (raw data) on page 54
238
351718/C