Simrad EK15
•
As Server
The
tab parameters are used when you wish to set up your EK15 as a server
As Server
in a larger network. This is typically used when a second computer is installed
somewhere else on the vessel to monitor – and control – EK15 operations.
Topics
• Remote Control: Application Information on page 192
• Remote Control: As Server on page 193
Related topics
• Installation menu on page 189
Remote Control: Application Information
Purpose
The
Application Information
system specific information. This is typically the
name (EK15) and type of product, as well as a an
identification number.
Parameters
1
Name
This is the name of your product (EK15). The name is fixed, and you are not
permitted to change it.
2
Description
This is the type of product. The description is fixed, and you are not permitted
to change it.
3
Application ID
This field allows you to enter a number. The number is used to recognize you EK15
in the larger network.
Topics
• Remote Control: Application Information on page 192
• Remote Control: As Server on page 193
Related topics
• Installation menu on page 189
192
tab allows you to enter
351718/C