Table of Contents
Advertisement
Simrad EK15
Description
The
dialog box provides
Port Monitor
one text field for incoming messages (
), and one for outgoing (
data
these fields and your own knowledge of
the data communication to investigate the
telegrams.
Note that the
Port Monitor
a tool for debugging purposes. It is neither
required nor intended for normal operation
of the EK15.
Parameters
1
Tx data
This text window displays the data
communication transmitted out from
the EK15.
2
Rx data
This text window is used to display the data communication received by the EK15
from external sensors (measuring devices) or peripheral systems.
3
Auto update
When this box is selected, the field is constantly updated with new information. If
you wish to freeze the information for further investigation, deselect to disable the
automatic update.
4
Hex display
When this box is selected, the information in the text field is shown in hexadecimal
format.
5
Clear
This button clears the text field to allow a fresh stream of communication data.
6
Current port
If you wish to change your attention to a different serial or LAN port, you can
choose the communication port here instead of returning to the
7
Always on top
This function places the
system presentations on your desktop.
Related topics
• External interface procedures on page 87
• I/O Setup dialog box on page 194
• Serial Port Setup dialog box on page 226
• LAN Port Setup dialog box on page 222
228
Rx
). Use
Tx data
dialog box is
dialog box on the top of all other dialogs and
Port Monitor
dialog box.
I/O Setup
351718/C
Advertisement
Table of Contents
