Simrad EK15 Reference Manual page 227

Multi purpose scientific echo sounder
Table of Contents

Advertisement

How the IP addresses and ports are set up in the EK15 to transmit data
1
Local IP Address
This IP address is unessential, unless you have more than one Ethernet board on
your computer. You must then specify the IP address of the board you wish to use.
2
Remote IP Address
If you wish to set up data broadcast to all peripherals on the system, select
IP Address 255.255.255.255
If your transmission is directly aimed at a particular recipient, you must specify
its IP address.
3
Local Port
The value of the
other than the default.
4
Remote Port
The EK15 software uses this network port to transmit information. The application
on the remote computer will "listen" to this port number. You must then access the
application on the remote computer to set up the local port to match.
How the IP addresses and ports are set up in the EK15 to receive data
1
Local IP Address
This IP address is unessential. If you have only one Ethernet board, you must use
the default value provided. If you have more than one Ethernet board on your
computer, or if you use an Ethernet board with multiple IP addresses, you must
specify the IP address of the board you wish to use.
2
Remote IP Address
If you wish to receive data, this IP address is unessential.
3
Local Port
This port must match the port number on the remote computer. To find the port
number on the remote computer, consult the documentation for the software utility
to be used. If the data communication is set up to only transmit information, this
parameter is not required.
4
Remote Port
If you set up your EK15 to receive data, this port is unessential. Keep the Remote
Port default value.
How the IP addresses and ports are set up in the EK15 to communicate in
a closed network
If the local system (EK15) and the remote system shall communicate point-to-point in a
closed network, both IP addresses, as well as both
must be defined.
351718/C
.
is unessential, and you do not need to specify a value
Local Port
Functions and dialog boxes
and
Local Port
Remote Port
Remote
values
225

Advertisement

Table of Contents
loading

Table of Contents