Table of Contents
Advertisement
f
You can open a dedicated dialog box.
How to select a numerical parameter using the +/- buttons
Move the cursor to either side of the button, and
1
observe that the background colour changes.
a
Click on the left side of the button to decrease the numerical value.
b
Click on the right side of the button to increase the numerical value.
How to select a numerical parameter by moving the cursor horizontally
1
Place the cursor on the middle of the button.
Click and hold the left mouse button depressed.
2
3
Move the cursor horizontally: left to decrease the value, or right to increase it.
4
Release the mouse button when the requested value is shown.
How to select a numerical parameter by means of the scroll wheel
1
Place the cursor on the middle of the button.
Spin the scroll wheel in either direction to increase
2
or decrease the value.
3
Release the scroll wheel when the requested value is shown.
How to select a parameter using a submenu
Click the middle section of the button to open
1
a submenu, then click the requested command,
option or button.
The chosen value is applied, and the submenu is
automatically closed.
Whenever applicable, you can also access the
2
submenu by clicking the left and right side of the
button. This method will not show you the choices on the submenu.
a
Click on the left side of the button to select a 'lower' submenu choice.
Click on the right side of the button to select a 'higher' submenu choice.
b
How to select parameters using a dialog box
1
Click anywhere on the button to open a separate
dialog box.
351718/C
Getting started
41
Advertisement
Table of Contents
