Simrad EK15 Reference Manual page 160

Simrad EK15
b Echogram sequences (raw data) are recorded using the
menu. These sequences are played back by placing the EK15 in Replay
Operation
mode.
c A "history file" is recorded automatically and continuously. When the file is full, it
will start to overwrite the oldest data, thus creating a "ring buffer". To play back the
history file, click the
Important
This is the default directory for raw data:
Windows 7:
c:\programdata\\simrad\EK15\data
Parameters
1
On/Off
You can use these options on the button menu to start and stop recording.
For faster control of the recording, you can also click the red circle on the right side
of the button to start recording. To stop recording, click the left rectangle.
Record
2
Split File
During recording, you can click this command at regular intervals. Every time you
do so, the current recording file will be terminated, and a new file will be started. In
this way you can manually control the size of each recorded file.
3
File Output
This command opens the
dialog box allows you to control the data recording.
Tip
Do not confuse the
Record
function records the echogram images automatically on the hard disk, and only a limited
number of images are saved until the newest image replaces the oldest. The
function allows you to record the raw data directly from the transceiver. The amount of
data you can record is only limited by the size of your storage media.
Related procedures
• Saving a single echogram image on page 53
• Saving echogram sequences (raw data) on page 54
• Recalling single echogram images on page 55
• Recalling echogram sequences (raw data) on page 56
Related topics
• Operation menu; functions and dialogs on page 149
• File Output dialog box on page 236
158
button on the
History
dialog box. The parameters provided by this
File Output
function with the automatic
function on the
Record
.
Title Bar
function. The
History History
Record
351718/C