Cleaning the vacuum module
Clean the vacuum module at least once per heating
season, subject to the dust content of the pellets.
Note
Using a pellet dust extractor (accessory) can signifi-
cantly reduce the maintenance effort for the entire vac-
uum system.
The pellet dust extractor separates dust particles from
the return air of the vacuum system and discharges
them into a dust container.
Servicing the rotary lock valve
8x
2.
Fig. 78
1. Remove the tunnel panel.
2. Remove the casing panel.
3. Remove pellet dust from the drip pans.
1.
4.
Commissioning, inspection, maintenance
1. Shut down the boiler.
2. Follow the vacuum module installation and service
instructions.
Installation and service instructions, vacuum
module
4. Fit the casing panel and tunnel panel.
Note
Alternatively, the rotary lock valve can also be
serviced from the right-hand side.
3.
95