Cleaning The Ignition Pipe - Viessmann VITOLIGNO 300-C Installation And Service Instructions Manual

Commissioning, inspection, maintenance

Cleaning the ignition pipe

2.
3.
Fig. 79
1. Remove the tunnel panels.
2. Remove the pellet hopper casing panels.
3. Remove the bottom boiler casing panel.
4. Undo the screws on the retaining bracket. Remove
the retaining bracket. Pull out the ignition element
with connecting lead.
96
1.
4.
5. Clean the ignition pipe at the air outlet using a thin
brush (e.g. pipe cleaner).
6. Fit components in reverse order.
5.
1.
2.