Viessmann VITOLIGNO 300-C Installation And Service Instructions Manual page 7

Disposal of packaging
Please dispose of packaging waste in line with statu-
tory regulations.
Symbols
Symbol Meaning
Reference to other document containing further information
Step in a diagram:
1.
The numbers correspond to the order in which the steps are carried out.
Warning of material losses and environmental pollution
Live electrical area
Pay particular attention.
■
■
■
■
Dispose of component correctly.
Dispose of component at a suitable collection point. Do not dispose of component in do-
mestic waste.
The steps in connection with commissioning, inspection and maintenance are found in the "Commissioning,
inspection and maintenance" section and identified as follows:
Symbol Meaning
Steps required during commissioning
Not required during commissioning
Steps required during inspection
Not required during inspection
Steps required during maintenance
Not required during maintenance
Component must audibly click into place.
or
Acoustic signal
Fit new component.
or
In conjunction with a tool: Clean the surface.
DE: Use the disposal system organised by
Viessmann.
AT: Use the ARA statutory disposal system (Altstoff
Recycling Austria AG, licence number 5766).
CH: Packaging waste is disposed of by the HVAC
contractor.
Information
7