Dialling Through A Switchboard; Registering The R Button - Canon MULTIPASS C75 User Manual

Dialling Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your unit is
connected through a PBX or other telephone switching system, you have to dial the
outside line access number first, and then the number of the party you are calling.
To facilitate this procedure, you can register the access type and the outside line
access number under the R button so that you only need to press Function and R
before dialling the fax/telephone number you want to reach. This is explained below.

Registering the R Button

Follow this procedure to register the access type and outside line access number under
the R button:
1
Press Function.
2
Press Data Registration.
3
Press Set twice.
4 Use d or u to select R-KEY SETTING.
5
Press Set.
6 Use d or u to select PBX.
7
Press Set.
8 Use d or u to select the access type of
your switching system.
• You can select from the following:
– HOOKING (Default)
– PREFIX
Chapter 3
DATA REGSTRATION
USER SETTINGS
DATE & TIME
R-KEY SETTING
Ex:
HOOKING
Ex:
PREFIX
Registering Information
PSTN
PBX
3-11