Table of Contents
Advertisement
Testing and Cleaning the BJ Cartridge Print Head
The print head in the BJ cartridge contains nozzles through which ink is propelled onto
the paper. To maintain the best possible print quality, these nozzles need to be cleaned
from time to time. Your unit is equipped with a print head cleaning function that does
this.
Printing the Nozzle Check Pattern
Before cleaning the print head, you may want to print the nozzle check pattern to test
the print head of the BJ cartridge installed in the unit. This test shows if each print head
nozzle is operating properly.
Refer to the flow chart (1 p. 12-9) for the correct order of testing and cleaning the BJ
cartridge print head.
Follow this procedure to print the nozzle check pattern:
1
Press Function.
2
Press Cleaning.
3
Press Set.
• The unit prints the nozzle check pattern.
When the Colour BJ cartridge is installed, the pattern includes all four colours; yellow,
magenta, cyan, and black. In the colour pattern you will notice that lines are missing
between the colours. This is normal.
24
24
24
64
n
Print the nozzle check pattern again after cleaning the BJ cartridge print head to check if
cleaning corrected the problem.
12-10
Maintenance
24
24
24
Ver. 1.00
24
NOZZLE CHECK
Nozzle Check Pattern
If the pattern is broken, missing,
or a specific colour is not printed,
clean the BJ cartridge print head.
(1 p. 12-11)
Chapter 12
Advertisement
Table of Contents
