Table of Contents
Advertisement
Sequential Broadcasting
Sending a Document to More Than One Destination
This feature allows you to scan a document once and send it to several destinations.
You can send the document to a maximum of 113 destinations using a combination of
the following dialling methods:
• One-touch speed dialling: up to 12 destinations
• Coded speed dialling: up to 100 destinations
• Regular dialling (using the numeric buttons): one destination
You can enter the destinations in any order. (Be sure to press Set after your entry with
the numeric buttons.)
n
If you frequently send documents to the same group of destinations, you can group them
and register these numbers for group dialling. You can register up to 111 fax numbers with
group dialling and send the same document to these numbers at the press of one or three
buttons. (1 p. 6-9)
Follow this procedure to send a document to more than one destination:
1
Open the document tray.*
2
Adjust the document feed lever for the
document you are loading. (1 p. 4-2)
3
Prepare the document and load it, face
down, in the ADF. (1 p. 4-4)
• For colour sending, press Colour/B&W
to turn on its light. (1 p. 7-2)
• To adjust the resolution and contrast,
1 pp. 7-3, 7-4.
4
Enter up to 113 fax numbers using any of
the following methods:
One-touch speed dialling:
Press the desired one-touch speed dialling
button(s).
Coded speed dialling:
Press Coded Dial, then use the numeric
buttons to enter the two-digit code. Repeat
for other codes.
• Be sure to press Coded Dial before each code.
*Hong Kong, Singapore, and Malaysia only.
Chapter 7
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Ex:
TEL=905 795 1111
Ex:
A01
Ex:
TEL=03 3758 2111
Sending Faxes
7-13
Advertisement
Table of Contents
