Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you want your unit to automatically switch between voice and fax calls.
n
For this mode, you need to connect the handset, a telephone, or an extension phone to
your unit. (1 p. 2-5)
Setting Fax/Tel Mode
Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
1
Press Function.
2
Press Data Registration.
3
Press Set.
Use d or u to select RX SETTINGS.
4
5
Press Set.
Use d or u to select RX MODE.
6
7
Press Set.
Use d or u to select FAX/TEL AUTO SW.
8
9
Press Set.
10
Press Stop to return to standby mode.
11
Confirm that FaxTel is displayed in the LCD.
• If FaxTel is not displayed, press Receive
Mode to select Fax/Tel Mode. After a few
seconds, the LCD returns to standby mode.
Chapter 8
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
FAX/TEL AUTO SW
RING START TIME
Ex:
15:00
FaxTel
Ex:
15:00
FaxTel
Receiving Faxes
8-5