Table of Contents
Advertisement
User Settings Menu
For details on accessing the settings below, 1 pp. 14-2, 14-3.
Setting
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
TELEPHONE #
MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
CALLING VOLUME
KEYPAD VOLUME
ALARM VOLUME
LINE MONITOR VOL
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
* Can only be adjusted for black & white transmissions. For colour transmissions, the TTI information is positioned
inside the image area.
** The default setting for Hong Kong and Malaysia is ROTARY PULSE.
14-4
Summary of Settings
Description
Sets the current date. (1 p. 3-7)
Enters the fax/telephone number you want to appear at
the top of each fax page you send. (1 p. 3-7)
Enters the name or company name you want to appear
at the top of each fax page you send. (1 p. 3-7)
Sets the options for the identification header (TTI).
Selects the position of the identification header
(outside or inside the image area).* (1 p. 3-6)
Selects the prefix for the identification header number.
(1 p. 3-6)
Selects the scanning contrast. (1 p. 7-4)
Enables/disables the off hook alarm that alerts you that
the handset is not seated properly in its cradle.
Sets the volume of the unit sounds.
Selects the ring volume when the unit detects a voice call.
Selects the keypad touch beep volume.
Selects the error alarm volume.
Selects the line monitor volume (sound during dialling).
Selects the volume of incoming calls.
Selects the dialling method the unit uses for your
telephone line type. (1 p. 3-10)
Enables dialling through a switchboard.
If you select PBX, you can select additional sub-
settings. (1 p. 3-11)
Sub-Settings
–
–
–
ON
OFF
OUTSIDE IMAGE
INSIDE IMAGE
FAX
TEL
STANDARD
DARKER
LIGHTER
ON
OFF
–
1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
HIGH
STANDARD
TOUCH TONE
ROTARY PULSE**
PSTN
PBX
(Default settings are shown in bold type.)
Chapter 14
Advertisement
Table of Contents
