Summary Of Lists And Reports - Canon MULTIPASS C75 User Manual

Summary of Lists and Reports

The table below shows the lists and reports that can be printed from your unit. Refer to
the pages indicated for more details.
Report or List
USER'S DATA LIST
ACTIVITY REPORT
TX (Transmission) REPORT
RX (Reception) REPORT
MULTI TX/RX (Transaction)
REPORT
DOC. MEMORY LIST
MEMORY CLEAR REPORT
1-TOUCH SPD DIAL LIST
CODED SPEED DIAL LIST
GROUP DIAL LIST
11-2
Reports and Lists
Description
Lists the current settings of your unit and the
registered sender information.
Shows recent facsimile transactions performed
by your unit.
You can enable or disable automatic printing of
this report after every 20 transactions. You can
also manually set the unit to print it.
Prints after transmission of a document. You
can enable or disable this feature, or set the
unit to print a report only when an error occurs.
You can also set the unit to print the first page
of the document under the transmission report
to remind you of the contents of the document.
Prints after reception of a document. You can
enable or disable this feature, or set the unit to
print a report only when an error occurs.
Prints after sequential broadcasting of a
document.
Lists the documents currently stored in the
unit's memory.
Prints automatically when power is restored to
the unit after a power cut. Lists the documents
deleted from memory.
Lists the numbers and names registered under
one-touch speed dialling buttons.
Lists the numbers and names registered under
coded speed dialling codes.
Lists groups registered under one-touch speed
dialling buttons and coded speed dialling codes.
Details
p. 3-9
p. 11-3
p. 14-5
p. 11-4
p. 14-5
p. 11-5
p. 14-5
p. 11-5
p. 7-16
p. 13-26
p. 6-13
p. 6-13
p. 6-13
Chapter 11