Dialling Through A Switchboard; Registering The R Button - Canon FAX-L290 User Manual

Dialling Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your FAX is
connected through a PBX or other telephone switching system, you have to dial the
outside line access number first, and then the number of the party you are calling.
To facilitate this procedure, you can register the PBX access type and the outside line
access number under the R button so that you only need to press this button before
dialling the fax/telephone number you want to reach. See below for details.

Registering the R Button

Follow this procedure to register the PBX access type and outside line access number
under the R button:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set twice.
Use ∂ or ¨ to select R-KEY
4
SETTING.
5
Press Set.
6 Use ∂ or ¨ to select PBX.
7
Press Set.
8 Use ∂ or ¨ to select the access type
of your switching system.
• You can select from the following:
– PREFIX
– HOOKING
Chapter 3
DATA REGSTRATION
USER SETTINGS
DATE & TIME
R-KEY SETTING
Ex:
Ex:
HOOKING
Registering Information
PSTN
PBX
3-9