Table of Contents
Advertisement
Clearing Jams
Jams in the ADF
When a document jams or misfeeds in the ADF, the LCD displays CHECK DOCUMENT.
Follow this procedure to clear the document jam:
n
You do not need to unplug the unit when clearing document jams.
1
Press Stop.
2
Open the operation panel partially by
gently pulling it towards you.
• It only opens slightly.
• Do not try to pull the document out without
opening the operation panel since you may
tear or smudge the document.
3
While holding the operation panel open,
remove the document.
• Pull it gently in either direction.
• If a multipage document is loaded, remove
the entire document from the ADF.
n
If the paper does not pull out easily, do
not force it. Contact your local
authorised Canon dealer or the Canon
help line.
4
When you are finished, close the
operation panel by pressing it down from
the centre.
• Be sure to close the operation panel until it
locks into place, or the unit will not function
properly.
5
Press Resume and start the operation again.
Chapter 13
13-3
Troubleshooting
Advertisement
Table of Contents
