Table of Contents
Advertisement
Telecom FaxAbility (New Zealand Only)
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This service allows you
to assign two numbers to your line: one for fax and one for telephone. When the fax
number is called, the network sends a specific ring tone which your unit recognises and
automatically handles as a fax call. If the telephone number is called, a different ring
tone is sent out from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller's end.
n
You can also set the unit for Telecom's FaxAbility service from the MultiPASS Suite.
(1 Software User's Guide)
Contact Telecom for connection information.
Setting the Unit for Network Switch
Follow this procedure to set the receive mode to NET SWITCH:
1
Press Function.
2
Press Data Registration.
3
Press Set.
4
Use d or u to select RX SETTINGS.
5
Press Set.
6
Use d or u to select RX MODE.
7
Press Set.
8
Use d or u to select NET SWITCH.
9
Press Set.
Chapter 8
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
NET SWITCH
INCOMING RING
Receiving Faxes
8-17
Advertisement
Table of Contents
