Table of Contents
Advertisement
Methods of Registering Information in
Your Unit
To customise your unit to your particular needs, you can adjust the general operation,
sending, receiving, printing, system settings, and speed dialling settings. There are two
methods of adjusting these settings:
Method 1: Using the unit operation panel
You can adjust settings directly via the operation panel of your unit. Detailed
instructions are described in this guide. Adjusting settings through the operation panel
is convenient when your unit is not connected to a PC.
Method 2: Using the MultiPASS Suite Software
You can adjust settings using the MultiPASS Suite software included with your unit. For
instructions, 1 Software User's Guide.
Before adjusting any settings, decide whether you prefer to make changes from the
operation panel or from the MultiPASS Suite. Using both—the operation panel and
the MultiPASS Suite—may cause confusion. Changes made to settings through the
operation panel will not be displayed in the MultiPASS Suite, and changes made in
the MultiPASS Suite will override any corresponding settings made through the
operation panel.
n
If your unit is connected to a PC, we recommend using the MultiPASS Suite to adjust
settings.
3-2
Registering Information
Chapter 3
Advertisement
Table of Contents
