Transmitting A Call; D Transmitting An Individual Call - Icom IC-F5400DP Series Operating Manual

8
BIIS 1200 SYSTEM OPERATION

Transmitting a call

D Transmitting an Individual call

<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > Signaling/Call > Call List Select)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select "Signaling/Call,"
then push [OK]�
3� Push [Up] or [Down] to select "Call List Select,"
then push [OK]�
4� Push [Up] or [Down] to select an Individual ID�
TIP: About the Direct Dial function
When you select "Direct Dial" at the end of the
list, you can directly enter an Individual ID using
[Up]/[Down] or Ten-key pad�
L Push [Left]/[Right] to move the cursor and push
[Back] to delete the entered ID�
L After entering, push [OK] to set the ID�
5� Push [PTT] to transmit the Individual call�
• "Calling" is displayed while transmitting�
• "Connect" is displayed when an acknowledgement is
received�
6� Hold down [PTT] and speak at your normal voice
level�
7� Release [PTT] to receive�
8� After the communication is fi nished, push [Back]
to send a Clear down signal to terminate the
connection�
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
Using [Call List Select]:
1� Push [Call List Select] to display the "Call List
Select" screen�
2� Push [Up] or [Down] to select an Individual ID�
L See "TIP: About the Direct Dial function" in step 4
to the left�
3� Push [PTT] to transmit the Individual call�
• "Calling" is displayed while transmitting�
• "Connect" is displayed when an acknowledgement is
received�
4� Hold down [PTT] and speak at your normal voice
level�
5� Release [PTT] to receive�
6� After the communication is fi nished, push [Back]
to send a Clear down signal to terminate the
connection�
8-3