Selecting A Zone; D Selecting A Zone - Icom IC-F5400DP Series Operating Manual

Vhf and uhf digital transceivers
Table of Contents

Advertisement

3
BASIC OPERATION

Selecting a Zone

D Selecting a Zone

Select a Zone type as shown:
Conventional, Trunking, or Voting
TIP: What is a "Zone"?
Certain channels are grouped together and assigned
to a Zone according to their intended use�
For example, Analog channels 'Station 1' and
'Station 2' are assigned to an "Analog" Zone, and
Digital channels 'Station 3' and 'Station 4' are
assigned to a "Digital" Zone�
<Key or Selector operation>
Portable: For all types
Mobile: For all types
z Rotate [Selector]*� (Only the Portable type)
*When "Zone" is assigned�
z Push [Zone Up] or [Zone Down]�
z Push [Zone Select] to display the "Zone Select"
screen. Then, push [Up] or [Down] to select a Zone.
After selecting, push [OK].
NOTE: For the Mobile Segment type
To select a Zone, see "Selecting a channel" as
described on page 3-4�
TIP: For the Portable Non-display type
Zones and Memory channels are assigned to a
[Selector] position�
Rotate [Selector], to set the assigned Zone and
channel to be used�
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > Zone Select)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select "Channel/Scan,"
then push [OK]�
3� Push [Up] or [Down] to select "Zone Select," then
push [OK]�
• Displays the "Zone Select" screen�
4� Push [Up] or [Down] to select a Zone, then push
[OK]�
5� The selected Zone is displayed�
3-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-f3400dp seriesIc-f4400dp seriesIc-f6400dp series

Table of Contents