Accepting A Pairing Request From A Bluetooth ® Device - Icom IC-F5400DP Series Operating Manual

11
Bluetooth ® OPERATION
Accepting a pairing request from a Bluetooth
6� Push [Up] or [Down] to select "Connect," then
push [OK]�
• Connects to the device�
Step 7: Setting the Bluetooth
If the Serial Port Access Authorization screen as
shown below is displayed, accept it�
L The content of screen may differ, depending on the
device�
L See the device's instruction manual for details�
(Example)
® device
Serial Port
®
(Bluetooth ® device)
Step 8: Connection
1� After the transceiver and the device connection
has succeeded, "" is displayed beside the
device icon�
2� Hold down [Back] for 1 second to return to the
standby screen�
" " is displayed instead of "
•
NOTE: When you pair with the third party's headset,
entering a PIN code or passkey may be required�
See the headset's instruction manual for details�
11-12
(Transceiver)
"
�