Section 13 Others; Displaying The Transceiver's Firmware Information - Icom IC-F5400DP Series Operating Manual

13
OTHERS
Displaying the transceiver's fi rmware information
You can display the transceiver fi rmware's information.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
( Menu > Information > Firmware Info)
1� Push [Menu] to display the Menu screen.
2� Push [Left] or [Right] to select "Information," then
push [OK].
3� Push [Up] or [Down] to select "Firmware Info,"
then push [OK].
4� Push [Up] or [Down] to display the transceiver's
firmware information.
5� Hold down [Back] for 1 second to return to the
standby screen.
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
1� Turn OFF the transceiver�
2� While holding down [P1] and [OK], turn ON the
transceiver�
• The transceiver enters the Firmware Information
mode.
3� Push [P1] to display the "Firmware Info" screen.
4� Push [Up] or [Down] to display the transceiver's
firmware information.
5� Turn OFF the transceiver, then turn it ON again to
exit the Firmware Information mode.
13-2