D For The Portable Non-Display Types And Mobile Segment Types - Icom IC-F5400DP Series Operating Manual

11
Bluetooth ® OPERATION
Resetting the installed Bluetooth

D For the Portable Non-display types and Mobile Segment types

NOTE: Before resetting, the Bluetooth
must be turned OFF� Otherwise, resetting cannot be
done�
Portable:
1� Turn OFF the transceiver�
2� Set [Selector] to any channel other than Channel
16�
3� While holding down [F1], turn ON the transceiver�
Continue holding down [F1] for about 3 seconds�
• 2 beeps sound�
• The transceiver enters the Bluetooth
4� Hold down [F3] for 1 second to reset the
Bluetooth ® unit's settings to their factory defaults�
5� Turn OFF the transceiver, then turn it ON again to
exit the Bluetooth ®
[F1]
[F3]
® unit
® function
® Set mode�
Set mode�
[VOL]
Mobile:
1� Turn OFF the transceiver�
2� While holding down [F2] and [F3], turn ON the
transceiver� Continue holding down [F2] and [F3]
for about 3 seconds�
• 2 beeps sound�
3� Hold down [F1] for 1 second to enter the Set
mode�
4� Push [F2] or [F3] to select "b0�"
5� Hold down [Down] for 1 second to reset the
Bluetooth ® unit's settings to their factory defaults�
6� Hold down [F1] for 1 second to exit the Set mode�
7� Turn OFF the transceiver, then turn it ON again to
normally operate the transceiver�
F1
[F1] [F2] [F3]
11-16
[Up]
Power key
F2 F3
[Down]