Icom IC-F5400DP Series Operating Manual page 34

2
PANEL DESCRIPTION
Assignable Software key functions
D For the Lever switch (For the Portable type transceiver) (Continued)
Null
No function
Backlight
Turns the backlight ON or OFF, even if the Backlight
setting is OFF
Lock
Turns the Key Lock function ON or OFF
L All assignable keys except the following are electronically
locked: [Monitor], [Light], [Lock], [Call], [Emergency],
[Surveillance], [PTT], and [Power]
Scan Start/Stop
Starts or cancels a scan
L When a scan started with the Power ON Scan or Auto
Scan function, slide the lever switch to pause the scan
The paused scan restarts after the preset time period has
passed
Talk Around
Turns the Talk Around function ON or OFF
L The Talk Around function equalizes the transmit
frequency to the receive frequency for transceiver-to-
transceiver communication
Scrambler/Encryption
In the Analog mode
Turns the Voice Scrambler function ON or OFF
L The Voice Scrambler function provides private
communication between stations
In the Digital mode
Turn the Encryption function ON or OFF
L The Voice or Data Encryption function provides private
communication between stations by using an Encryption
Key and Key ID
Site Lock
Turns the Site Lock function ON or OFF
L When this function is turned ON, the transceiver cancels
resuming a roaming scan, and stays on the current site,
regardless of the error rate
VOX
Turns the VOX function ON or OFF
L The function automatically switches between receive and
transmit by detecting your voice
NOTE: To use the function, a headset and a VOX
converter cable are required (user supplied)
Lone Worker
Turns the Lone Worker function ON or OFF
L I f no operation occurs during the specified period,
the Lone Worker function automatically makes the
transceiver enter the emergency mode
NOTE: To use the Lone Worker function, set the
related settings using the programming software
Surveillance
Turns the Surveillance function ON or OFF
L When this function is turned ON, the beep is not heard
and the backlight and the Status indicator do not light,
even when a signal is received, or a key is pushed
Rotary Selector Shift
Enters the [Selector]'s Shift mode
• A user can use a [Selector]'s secondary function in the
Shift mode
LCD Mode
Sets the LCD Mode to Day or Night
L The Day mode is for daytime operation, and the display
backlight color is set to white
L The Night mode is for nighttime operation, and the
display backlight color is set to black
2-26