Table of Contents
Advertisement
6
MENU SCREEN
Signaling/Call
Call List Select
In the Analog mode (5Tone/BIIS 1200 only)
In the Digital mode
Selects a calling destination� After selecting, push
[PTT] to transmit the voice call to the selected
destination� (pp� 7-3, 7-4, 8-3, 8-4)
Call Menu
In the Analog mode (BIIS 1200 only)
Selects a calling destination and a call type (Status,
Message, and Write Message)� After selecting,
you can select or directly enter a message before
transmitting it� After selecting or entering a message,
push [PTT] to transmit it� (pp� 8-7, 8-9)
In the Digital mode
Selects a calling destination and a call type (Status,
Message, Write Message, Ambience Listening, Stun,
Revive, Kill, and Broadcast)� After selecting, push
[PTT] to transmit the call to the selected destination�
(pp� 7-5, 7-7, 7-9, 7-10 ~ 7-12)
NOTE: When the call type is "Status," "Message,"
or "Write Message," you can select or directly enter
a message before transmitting it� After selecting or
entering a message, push [PTT] to transmit it� See
pages 7-5, 7-7, and 7-9 for details�
Clear Incoming
In the Analog mode (BIIS 1200 only)
In the Digital mode
Clears the received call log from the Incoming list�
(pp� 7-24, 8-15)
Clear Outgoing
In the Digital mode
Clears the transmit call log from the Outgoing list�
(p� 7-25)
DTMF Autodial
Displays the "DTMF Autodial" screen� Then, push
[Up] or [Down] to select a DTMF code� After selecting,
push [PTT] to transmit the selected DTMF code�
Telephone
In the Digital mode (dPMR™ Trunking only)
Displays the "Phone List" screen� Then, push [Up]
or [Down] to select a phone number� After selecting,
push [PTT] to connect to the telephone network�
Group Select
In the Analog mode (5Tone/BIIS 1200 only)
In the Digital mode
Displays the "Group Select" screen� Then, push [Up]
or [Down] to select a Group ID from the Call List� After
selecting, push [PTT] to transmit a Group call�
(pp� 7-4, 8-4)
Incoming
In the Analog mode (BIIS 1200 only)
In the Digital mode
Displays a log of the received Individual call, Call Back
call, Status message, and Message� (pp� 7-22, 8-14)
Individual Select
In the Analog mode (5Tone/BIIS 1200 only)
In the Digital mode
Displays the "Individual Select" screen� Then, push
[Up] or [Down] to select a Individual ID from the Call
List� After selecting, push [PTT] to send a Individual
call� (pp� 7-3, 8-3)
Message
In the Analog mode (BIIS 1200 only)
In the Digital mode
Displays the "Message" screen� Then, push [Up] or
[Down] to select a message� After selecting, push
[PTT] to send the Message to the currently selected
destination� (pp� 7-7, 8-9)
Outgoing
In the Digital mode
Displays a log of the transmitted Individual calls�
(p� 7-23)
Status
In the Analog mode (BIIS 1200 only)
In the Digital mode
Displays the "Status" screen� Then, push [Up] or
[Down] to select a status message� After selecting,
push [PTT] to send the message to the currently
selected destination� (pp� 7-5, 8-7)
Write Message
In the Analog mode (BIIS 1200 only)
In the Digital mode
Enables the user to directly enter a message� After
entering, push [PTT] to transmit it� (p� 7-9, 8-11)
6-10
Advertisement
Table of Contents
