Changing The Opening Screen Image; D Changing The Opening Screen Image; D Returning To The Default Setting - Icom IC-F5400DP Series Operating Manual

13
OTHERS

Changing the opening screen image

For only the Portable Ten-key type, Portable Simple
key type, or Mobile LCD type transceivers, you can
change the opening screen image.

D Changing the opening screen image

1� Connect a transceiver to your PC using a USB
cable.
2� Set the USB Mode Select to "Card Reader."
(Menu > Function > USB Mode Select)
3� Open the Opening Screen folder according to the
instructions on page 9-8.
4� Save an image in the Opening Screen folder using
your PC.
NOTE: The image file has to satisfy the
following conditions.
The file format is "24 bit bitmap."
The file size is
• "318 × 148 pixel" for the Mobile LCD type.
• "294 × 220 pixel" for the Portable Ten-key type,
Portable Simple key type, or HM-218.
The file is named as
• "mobile.bmp" for the Mobile LCD type.
• "portable.bmp" for the Portable Ten-key type,
Portable Simple key type, or HM-218.
5� Set the USB Mode Select to "Data Transfer."
(Menu > Function > USB Mode Select)
6� Turn OFF the transceiver�
7� Turn ON the transceiver.
• The previously set image is displayed first.
• "User Opening Screen Data Now Loading..." is
displayed for a while and then the newly set opening
screen is displayed.
NOTE:
• When Opening Text is entered using the
CS-F3400DP, the Opening screen is not
displayed.
( User Interface - Key Assign - Display - Opening Text)
• When using the RMK-5 or RMK-7, first connect all
the transceivers and microphones, and then turn
the transceiver ON or OFF to change the opening
screen image.

D Returning to the default setting

1� Connect a transceiver to your PC using a USB
cable.
2� Set the USB Mode Select to "Card Reader."
(Menu > Function > USB Mode Select)
3� Open the Opening Screen folder according to the
instructions on page 9-8.
4� Delete an image from the Opening Screen folder.
5� Set the USB Mode Select to "Data Transfer."
(Menu > Function > USB Mode Select)
6� Turn OFF the transceiver�
7� Turn ON the transceiver.
• The previously set image is displayed first and the
default image is displayed.
13-6